Blink Camera Not Recording? 10 Quick Fixes

Quick Fix

Blink camera not recording? Check motion detection is enabled in Blink app – tap camera settings and ensure Armed mode is on. Verify camera batteries aren’t dead. Check WiFi connection. Make sure you have an active Blink subscription or local storage for cloud recordings.

Why Won’t Blink Camera Record?

Blink recording issues come from motion detection disabled, dead batteries, WiFi problems, subscription expired, or incorrect sensitivity settings. The camera must be armed and have storage available to record clips.

Method 1: Arm Your System

Camera must be armed to record.

1. Open Blink app
2. Check if system shows Armed
3. Tap arm icon if disarmed
4. Ensure specific camera is enabled
5. Test by triggering motion

Method 2: Enable Motion Detection

Motion detection may be off.

1. Blink app > tap camera
2. Go to Device Settings
3. Find Motion Detection
4. Toggle to On
5. Adjust sensitivity if needed

Method 3: Check Batteries

Dead batteries stop recording.

1. Open Blink app
2. Check battery icon on camera
3. Replace if low (AA lithium recommended)
4. Use Energizer Ultimate Lithium
5. Avoid rechargeable batteries

Method 4: Verify Subscription/Storage

Cloud recording requires subscription.

1. Blink app > Account > Subscriptions
2. Check if subscription active
3. Or verify Sync Module 2 has USB drive
4. Local storage needs USB flash drive
5. Renew subscription if expired

Method 5: Adjust Motion Sensitivity

Sensitivity too low misses motion.

1. Camera Settings > Motion Settings
2. Increase sensitivity slider
3. Adjust motion zones if available
4. Test with walk test
5. Fine-tune based on results

Method 6: Check WiFi Signal

Weak WiFi prevents uploads.

1. Check signal strength in app
2. Move camera closer to router
3. Or move Sync Module closer
4. Restart router
5. Consider WiFi extender

Method 7: Restart Sync Module

Sync Module manages recordings.

1. Unplug Sync Module from power
2. Wait 30 seconds
3. Plug back in
4. Wait for solid green and blue lights
5. Test recording

Method 8: Check Activity Zones

Zones may exclude motion areas.

1. Camera Settings > Motion Zones
2. Review zone configuration
3. Ensure monitored area is included
4. Adjust zones to cover entry points
5. Save and test

Method 9: Update Firmware

Outdated firmware causes issues.

1. Blink app > Sync Module > Settings
2. Check for firmware updates
3. Updates install automatically usually
4. Keep camera powered during update
5. Restart after update

Method 10: Delete and Re-add Camera

Fresh setup fixes glitches.

1. Blink app > Camera Settings
2. Select Delete Camera
3. Follow prompts to re-add
4. Reconfigure motion settings
5. Test recording

FAQ

Why does Blink only record sometimes?

Intermittent recording often means motion sensitivity is too low or activity zones exclude some areas. Increase sensitivity and expand zones. Also check for objects causing false triggers that fill up clip storage.

How long do Blink clips record?

Blink records 5-60 second clips depending on settings. Adjust in camera settings under clip length. Longer clips use more battery. With subscription, clips are stored in cloud for 60 days.

Why is Blink recording but no alerts?

Recording without alerts means notifications are disabled. Check Blink app notification settings and phone notification permissions. Also verify Do Not Disturb isn’t blocking alerts.