Samsung Washer Error Codes: Complete Fix Guide

Quick Fix

Samsung washer showing error code? Write down the code and unplug the washer for 5 minutes. Most common codes: UE/UB = unbalanced load (redistribute clothes), 4E/4C = water supply issue (check hoses), 5E/5C = drain problem (clean filter). Plug back in and try again.

Common Samsung Washer Error Codes

Samsung washers display error codes when problems occur. The code tells you exactly what’s wrong. Here are the most common codes and how to fix them.

Error UE or UB – Unbalanced Load

Load is uneven in drum.

1. Pause the washer
2. Open door and redistribute clothes
3. Don’t wash single heavy items alone
4. Add similar weight items to balance
5. Ensure washer is level on floor
6. Restart cycle

Error 4E or 4C – Water Supply Issue

Washer can’t fill with water.

1. Check water supply valves are open
2. Inspect inlet hoses for kinks
3. Clean inlet hose filters (mesh screens)
4. Verify water pressure is adequate
5. Check hot and cold are connected correctly

Error 5E or 5C – Drain Problem

Water won’t drain from drum.

1. Check drain hose for kinks
2. Clean the debris filter (front bottom)
3. Ensure drain hose isn’t too deep in standpipe
4. Check for clogs in drain pump
5. Verify standpipe isn’t clogged

Error dE or DC – Door Not Locked

Door isn’t closing properly.

1. Ensure door is fully closed
2. Check for clothes stuck in door seal
3. Clean door latch area
4. Wait 1-2 minutes after cycle for door unlock
5. Door lock mechanism may need replacement

Error LE or LC – Water Leak Detected

Washer detected water leak.

1. Check for visible water leaks
2. Inspect door seal for damage
3. Check drain hose connections
4. Don’t use too much detergent (causes overflow)
5. Use HE detergent only

Error OE – Overflow Error

Too much water in drum.

1. Check water inlet valve (may be stuck open)
2. Reduce detergent amount
3. Run rinse/spin cycle to drain
4. Water level sensor may need replacement

Error HE or HC – Heater Problem

Water heating issue.

1. Try washing with cold water
2. Check if hot water supply is on
3. Heating element may need replacement
4. Call technician for heater issues

Error tE or tC – Temperature Sensor

Temperature sensing problem.

1. Unplug for 5 minutes and retry
2. Use cold water cycles temporarily
3. Temperature sensor may need replacement
4. Professional repair usually required

How to Reset Samsung Washer

Clear error codes.

1. Unplug washer from power
2. Wait 5 minutes
3. Plug back in
4. Run a rinse/spin cycle to test
5. If error returns, address root cause

FAQ

Why does my Samsung washer keep stopping mid-cycle?

Mid-cycle stops are usually due to unbalanced loads (UE), door issues (dE), or drain problems (5E). The washer pauses to protect itself. Redistribute clothes, check the door seal, and clean the drain filter.

How do I clean Samsung washer filter?

Open the small access panel at front bottom of washer. Place towels down for water. Turn the filter cap counterclockwise and pull out. Clean debris and rinse filter. Reinstall by turning clockwise.

What does Samsung washer self clean do?

Self Clean cycle cleans the drum without clothes using hot water. Run monthly to prevent odor and buildup. You can add washer cleaner tablets for better results. Don’t add clothes or detergent.